A Treatment to remove heavy metals from human includes chelation as well as supportive measures, often used in combination.
Multi Metal D-Tox was developed specifically with the technical know how of an established leading colloid manufacturer in Australia. It encompasses 9 distinct advantages compared with other similar products with these available technologies. The advantages are:
- use of charged and structured water;
- the amino acid EDTA is present in colloidal form for ease of absorption;
- suitable for oral or transdermal usage due to the colloidal nature of the product;
- pH of the product is maintained around 5.5 which makes it optimal for dermal usage;
- direct absorption into bloodstream with the colloidal nature even taken into digestive tract;
- catalyst agent to produce nascent oxygen (proprietary process);
- effective removal of heavy metals at cellular level;
- embedded alkalizing agent to promote body alkaline for more effective removal of heavy metals; and
- buffer included for protection of the eliminating organ.
Usage Protocol:
Multi Metal D-Tox should be used in conjunction with the Heavy Metal Test Kit. After a client has taken a Heavy Metal Test and his urine sample is positive for ionic heavy metals, initially prescribe 2 mL per day of Multi Metal D-Tox (preferably mixed in 1 litre of drinking water, consumed over the day). Approximately 2 weeks after commencing on the Multi Metal D-Tox (chelate) a retest using the Heavy Metal Test Kit should be conducted.
On re-testing, if (a) the Heavy Metal Test Kit shows green, the client should continue to take the Multi Metal D-Tox at 2 mL, 3–4 times per week until the bottle is consumed, allowing heavy metals stored in soft tissue to be released by chelation. Refer FAQ 16 and Free Radicals, para 5; (b) If the test still shows signs of ionic heavy metals, continue with Multi Metal D-Tox daily until colour shows green.
N.B. it is also recommended that the client should endeavour to find the source of the contaminate.
It is also recommended that testing should be carried out half yearly once the Heavy Metal Test Kit shows green (i.e. no ionic metals).
Proving that the Multi Metal D-Tox really works:
We know that a change in colour of the green test solution indicates the presence of ionic metals. Any product that is able to 'chelate' (neutralise) ionic metals must be able to maintain a green colour once the chelate is added to the sample containing the contaminate.
Run the following test to verify the effectiveness of Multi Metal D-Tox:-
1. Collect a sample that showed a change in the colour of the Heavy Metal Test Kit indicating the presence of ionic metals.
2. Using the same sample, reduce the sample to just a quarter of sample cup.
3. Add 5 drops of Multi Metal D-Tox to the sample cup.
4. Take an unused coated test tube, remove the cap, and using a dedicated pipette, add approximately 0.5 ml (~ 12 drops) of Solvent to the test tube.
5. Replace the cap and shake the test tube vigorously for about 30 seconds to effect dissolution of Dithizone in the solvent. Invert the test tube and let it stand using the cap as the base for another 30 seconds. The solution should now be green and fresh and ready for use.
6. Remove the test tube cap, pick up approximately 2-3mL of testing sample from the sample cup using a clean pipette and add it to the test tube. Replace the test tube cap.
7. Shake vigorously for about 5 seconds, then let the test tube stand using the cap as the base, so that the solution is allowed to separate.
8. Read the top layer and you will see that the solution remains green indicating the effective working of the Multi Metal D-Tox in chelating the ionic heavy metals.
